Two 0.4-4 x 1600mm Slitting Lines Shipped to Russia
Today we are loading 2 sets of 0.4-4×1600 Slitting Line Machines to our Russian customer. With slitting speed maximum 120m/min, the whole line is composed of 20 ton decoiler, 2+5 leveler, coil side guide, main slitter, edge scrape winder, pre-separator & Tensioner, 20ton recoiler, hydraulic system, and electrical control system. Machine slitting capacity as below: for thickness 4.0mm, max 12 strips, for thickness 2-3mm, maxim 15 strips, for thickness 1.5-2.0mm, maximum 18 strips, for thickness 1.0-1.5mm, max 20 strips.
JINYE builds coil slitting lines and cut to length lines in Wuxi, China, and has supplied them to customers in more than 100 countries since 2000.
Send the coil thickness, strip width and required output, and we will reply with a recommended configuration and a quotation.
More from the workshop
Related news
Company News
16mm Stainless Slitting Line & Cut to Length Line, China
A repeat order from a China customer covers a 16 mm heavy-duty stainless slitting line and a matching cut to length line, built to the same specification.
Read more
Company News
16mm Stainless Cut to Length Line Running in Chengdu
A 16 mm stainless cut to length line is now running at a customer plant in Chengdu, China — a heavy-duty version of the 14 mm line supplied earlier.
Read more
Company News
Inside a Stainless Steel Cut to Length Line Plant
A stainless steel cut to length line levels out coil memory in two passes, then shears to length. Flatness held to 1 mm/m, cut lengths from 2 m to 12 m.
Read moreTalk to us
Working on a line like this one?
Tell us the coil or sheet you need to produce. We will come back with the configuration, the working range and the delivery schedule that fit your project.
- Material grade, thickness and coil width
- Finished strip width or cut length
- Target output and site conditions