Slitting Stainless Steel: Why It Is Harder Than Mild Steel
Work hardening, cutting force and surface marking: three reasons stainless needs a different slitting line, and what to change in the specification.
Read the updateNewsroom
News & Insights
Machine shipments, installations and technical notes from the JINYE workshop in Wuxi — written by the people who build the lines.
Industry News
What Decides Cut to Length Accuracy on a Coil Line?
Length error comes from the measuring roll, the leveler, shear response and the stacker — where each one costs you millimetres, and what to specify.
Read more
Industry News
Flying, Rotary, Swing or Stop Shear: Choosing a CTL Shear
Stop, swing, rotary or flying: how thickness, speed and surface finish decide which shear a cut to length line is built around.
Read more
Industry News
Burr and Camber in Slit Strip: What the Tolerances Mean
Burr is a share of thickness and camber is millimetres per metre — how each is measured, what causes it, and which one the slitter owns.
Read more
Industry News
How to Specify a Coil Slitting Line: Six Inputs That Set It
Six inputs — material strength, thickness and width, coil weight, strip count, tolerance and line speed — decide how a slitting line is built.
Read more
Company News
16mm Stainless Slitting Line & Cut to Length Line, China
A repeat order from a China customer covers a 16 mm heavy-duty stainless slitting line and a matching cut to length line, built to the same specification.
Read more
Company News
16mm Stainless Cut to Length Line Running in Chengdu
A 16 mm stainless cut to length line is now running at a customer plant in Chengdu, China — a heavy-duty version of the 14 mm line supplied earlier.
Read more
Company News
Inside a Stainless Steel Cut to Length Line Plant
A stainless steel cut to length line levels out coil memory in two passes, then shears to length. Flatness held to 1 mm/m, cut lengths from 2 m to 12 m.
Read more
Industry News
Slitting Line Blade Material: T10, H13, HM-3 and 6CrW2Si
Slitting blades use T10, H13, H13K, HM-3, 6CrW2Si, Cr12WMoV or W18Cr4V tool and die steels, in 100-500 mm diameters, for strip from 0.1 mm to 10 mm thick.
Read more
Company News
2-8 x 2000mm Steel Coil Slitting Machine, UAE
A fully automatic 2-8 x 2000 mm steel coil slitting line was loaded for a UAE customer, covering coil 2 mm to 8 mm thick and up to 2000 mm wide.
Read more
Company News
0.3-3 x 1650mm Stainless Rotary Shear Line Installed
A 0.3-3 x 1650 mm stainless rotary shear cut to length line is installed and running, shearing coil on the fly so no stop marks are left on the sheet.
Read more
Company News
Repeat Order: Cut to Length Line for Indian Customer
An Indian customer placed a repeat order for a cut to length line after running the first one, citing machine quality and after-sales service.
Read moreNext step
Seen a line here that fits your coil?
Each machine in these updates was configured for one customer's material and output. Send us your coil — thickness, width, grade and target production — and we will size a line to it.
